I have another thread going here but I ran into a problem with the AC original fuel pump. On the advice of some I decided to replace the Moss replacement fuel pump with the original AC unit. I took the copy off. Cleaned the AC up and in the process of rebuilding it I noticed the priming lever would not move the cam lever or vice versa. Using some effort I could get it to move but I have to apply pressure to get it to go through it's movement range. So I squirted some brake cleaner in there and worked it and then some 3 in 1 oil without much effect. I have the cam lever out and the spring return on the priming lever out so neither of them is causing it. Anybody had this problem and if so how did you correct it? Bruce