D
DougF
Guest
Guest
Offline
I was attempting to break in the cam this evening after having a starter problem and a leaking radiator hose.
Everything was going very well(except for the miscellaneous stuff burning off) until about 10-15 minutes into the break in, the motor stalled(not an issue). Antifreeze erupted immediately from the overflow tube and sent me running for cover. I'm hoping it was an air pocket in the system. After a short cool down, I restarted the motor and things heated up quickly again, but no eruption.
The temp gauge is reading normal.
Any thoughts of what it might be other than air?
I'm going to replace the thermostat tomorrow.
There is no oil/antifreeze mixing anywhere.
Everything was going very well(except for the miscellaneous stuff burning off) until about 10-15 minutes into the break in, the motor stalled(not an issue). Antifreeze erupted immediately from the overflow tube and sent me running for cover. I'm hoping it was an air pocket in the system. After a short cool down, I restarted the motor and things heated up quickly again, but no eruption.
The temp gauge is reading normal.
Any thoughts of what it might be other than air?
I'm going to replace the thermostat tomorrow.
There is no oil/antifreeze mixing anywhere.