Got_All_4
Luke Skywalker
Offline
Hi everyone. I have a customer that is looking for a set of front and rear fenders for a 1961 TRA. He is stripping his customers car and ran into some major horrible patch work that had tons of bondo work over top. It's a shame because the rest of the car is extremely sold. He is a collision shop that does a few restorations to keep the guys working during slow times so he does not good sources. He exhausted the ones I gave him. The current fenders would take about 40 hours of work to straighten and would rater put the $ some ware else into the project.
The other shame is this is the 2nd time the car has been done in 3 years. The previous work was done by a body technician in his home shop and there was a lot of dirt in the paint and filler cracking all over the place. Not a lot of interest in northeastern Ohio for these cars and most shops don't want to work on them and when they do the craftsmanship is less the desirable. Thanks Larry
The other shame is this is the 2nd time the car has been done in 3 years. The previous work was done by a body technician in his home shop and there was a lot of dirt in the paint and filler cracking all over the place. Not a lot of interest in northeastern Ohio for these cars and most shops don't want to work on them and when they do the craftsmanship is less the desirable. Thanks Larry