Steve1970
Senior Member
Offline
i was re-connecting some wires this weekend after refitting the radio console, when I got some crossed and zapped the life out of the fan motor.
so i've got to pull the heater box out, and i'm hoping i don't have to remove the dashboard/dashtop to get at it. seems like at least one guy other there in the archives managed to do it, but it wasn't entirely clear to me what else he had removed.
the haynes manual shows a couple of bolts to mount the left side of the unit, and several more where it is attached from the top.
so how much dismantling have you guys encountered when pulling the heater box? are all the bolts accessible?
btw Paul... awesome photos of the heater box reconditioning on 74tr6.com. will be very useful during the rebuild phase.
so i've got to pull the heater box out, and i'm hoping i don't have to remove the dashboard/dashtop to get at it. seems like at least one guy other there in the archives managed to do it, but it wasn't entirely clear to me what else he had removed.
the haynes manual shows a couple of bolts to mount the left side of the unit, and several more where it is attached from the top.
so how much dismantling have you guys encountered when pulling the heater box? are all the bolts accessible?
btw Paul... awesome photos of the heater box reconditioning on 74tr6.com. will be very useful during the rebuild phase.