• Hey Guest!
    BCF is a resource offered at no cost to the Little British Car community. We do not require you to pay to play here. However, if you find BCF helpful, appreciate no pop up ads, and you want to ensure we stay online - Please support us with an "optional" low-cost (less than many car club dues) member upgrade. There are some benefits to upgrading!
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Question for you Bugeye guys regarding trunk side panels

Share this page

ShawnC_at_Moss

ShawnC_at_Moss

Jedi Hopeful
Offline
We are reviewing our offering of Bugeye interior trim and in laying things out and seeing what goes where it seems in our trunk liner set you get the floor in Hardura and two cardboard side panels. The side panels are raw. According to the Original Sprite-Midget book they should be Grey. Grey what? Vinyl or spray paint?

Then what is everyone really doing? Covering in vinyl that matches the trunk mat color or perhaps in the interior panel vinyl or really making the Grey like original.

Shawn
 
Shawn,
I'm in the process of restoring my Bugeye and would like the original trunk liner set with the grey panels. I think the grey panels are 'coated' in grey vs painted and I would like something more durable than the original cardboard. I would also like original ribbed door inserts if possible.
Thanks, Rut
 
Once Ray Evans gets on here you will know what it should be (from the factory)!
BillM
 
They were a grained fiberboard that were gray (not vinyl). I ones I got from Heritage Trim were the correct board and grain except theye were black. I found a paint that was a close match to the original gray.
 
Hey Shawn:

OEM Style Ribbed Rubber Floor Covering.
OEM Style Ribbed Rubber Floor Covering.
OEM Style Ribbed Rubber Floor Covering.
OEM Style Ribbed Rubber Floor Covering.
OEM Style Ribbed Rubber Floor Covering.


 
AN5Sprite said:
Hey Shawn:

OEM Style Ribbed Rubber Floor Covering.
OEM Style Ribbed Rubber Floor Covering.
OEM Style Ribbed Rubber Floor Covering.
OEM Style Ribbed Rubber Floor Covering.
OEM Style Ribbed Rubber Floor Covering.
Click to expand...
https://www.spritespot.com/phpBB3/v...89&p=15661&hilit=rubber+floor+covering#p15661

That question has been looked into before. Apparently the tooling costs are prohibitive. I can't find the thread I'm thinking about, but if I recall correctly, the guy that did all the work on finding a manufacturer that could reproduce those mats calculated each set would cost about $700 if He placed a minimum order of some amount in the low 100's. sorry I can't remember all the details.

regards

Mark
 
Personally, i'd like to see the rubber transmission tunnel cover reproduced. I have my original, but it is torn and in pretty bad shape. I will either use the carpet or attempt to use the fine rib rubber from floormatcompany.com. Don't get me wrong, the carpet is nice, but not original...
 
markberry said:
I guess it was 50 mats ordered to make the price $750
https://www.spritespot.com/phpBB3/viewtopic.php?f=24&t=42&p=16754&hilit=floor+mats#p16754

I'd like to have a set too, but I think I'd have to set my price limit at $250
Click to expand...

Couple points:

1. This was about a DECADE ago.

2. It was an individual and not a company with the clout of Moss Motors.

Does anyone know the George Marinos referred to in that thread? Is he still around?

I just don't accept that eight years ago, somebody who knows somebody said on the internet that eleven years ago something was cost prohibitive as a good reason not to revisit this subject.
 
Well said Steve. I have given the task to Kelvin Dodd in our tech services department who is in charge of reviewing our upholstery. The rubber mats we offer for spridget are similar to the original bugeye rubber floors, he tells me. He is going to contact that vendor, at some point, and see what it might cost. Now, how do we get an original pattern if and when we need it?? And you know, it will only be in black if it every happens.

Shawn
 
Thanks Shawn. I try. I'm sure getting hold of a set will be easier for Moss than it has been for me.
As much as I want OEM style reproduction.... I'd be happy if you augmented the typical floor mat set with a SIMILAR rubber trans tunnel cover and a rubber cover to go over the jacking cross member at a fair price.

To help satisfy the bean counters:
Maybe you could put a little sound deadening material on the underside of the trans tunnel cover and market it as increased modern comfort through noise and heat reduction WITH "period styling"...:cool-new:

Just an idea.
 
markberry said:
https://www.spritespot.com/phpBB3/v...89&p=15661&hilit=rubber+floor+covering#p15661

That question has been looked into before. Apparently the tooling costs are prohibitive. I can't find the thread I'm thinking about, but if I recall correctly, the guy that did all the work on finding a manufacturer that could reproduce those mats calculated each set would cost about $700 if He placed a minimum order of some amount in the low 100's. sorry I can't remember all the details.

regards

Mark
Click to expand...

I was browsing around here
https://www.biltema.se/sv/
and found some nearly identical rubber triangle mat. I bought a large sheet, enough for my Bugeye and to do the doors on my Mini. I'm sure they still have it. I suppose I should get off my a** and look up the part number in my garage, if it's actually there.
 
kellysguy said:
Shawn, nice to see you guys looking into this.
Click to expand...

I have found Shawn and Kelvin to be treating product quality very seriously. From simple things like the non-threaded shoulder length for the bolts for the rear axle drive flange to more complex like recently working with Shawn on an extensive look at improving the brake light switch. I have found it worthwhile taking the time to work with these guys.
 
Regarding the trunk side panels, I have an original set pulled out of mine. One of them is cracked and only really usable as a pattern. I'd be happy to send you a swatch to use for color/texture matching.
 
Similar threads
Thread starter Title Forum Replies Date
I Bugeye generator/alternator conversion question Spridgets 7
T Question regards headlight ring 'thickness' for bugeye Spridgets 3
T Bugeye Sprite defrost vent installation question Spridgets 18
Rut Bugeye seat question Spridgets 10
M Oil filter on Bugeye question Spridgets 4
P Spitfire Spitfire question from bugeye owner Triumph 2
longbridgehealey Bugeye electrical question Spridgets 9
Rut Bugeye grill question Spridgets 40
Trevor Jessie Question about bugeye windscreen frame. Spridgets 5
longbridgehealey New Bugeye ignition switch question Spridgets 10
drooartz Question on Bugeye Harley mirrors Spridgets 28
J Bugeye tach conversion question Spridgets 6
I Question about Bugeye bows Spridgets 7
M Question on Bugeye Tonneau Cover Spridgets 7
regularman A question for one of you bugeye owners Spridgets 12
I Bugeye door latch question Spridgets 4
J Mounting pedals question - My Bugeye Spridgets 8
regularman bugeye question Spridgets 4
J Question regarding Bugeye tach and related topics Spridgets 8
J Bugeye exhaust question - am insulating floorboard Spridgets 2
M Bugeye bonnet sheetmetal question Spridgets 12
mrsprite Bugeye VIN question Spridgets 6
I Bugeye start question Spridgets 11
smaceng Bugeye seat back question please Spridgets 5
drooartz Question: what needed for Bugeye alignment? Spridgets 18
RickB Bugeye might be available - value question Spridgets 8
T Bugeye rear bush question - bolt is stuck and am I Spridgets 12
Ohiobugeye Bugeye Master Cylinder Question Spridgets 7
Steve P. Bugeye electrical layout question Spridgets 7
Trevor Jessie Gundy Bugeye tire question Spridgets 6
T Bugeye 1275 conversion question - alternator? Spridgets 8
1 4 link on a bugeye? Question from new owner. Spridgets 6
TexasSprite Bugeye Release Bearing Question Spridgets 4
John Moore Bugeye Bonnet Question Spridgets 6
JPSmit bugeye hood question Spridgets 3
H Bugeye Wheel Bearings - Question Spridgets 7
Team_Sprite bugeye washer pump question Spridgets 1
T Bugeye wiring question [last one - really!] Spridgets 10
T Sorry - related question on Bugeye comb switch Spridgets 9
Kurtis Bugeye Sprite Color Question... Spridgets 5
M bugeye quarter panel question Austin Healey 0
M bugeye quarter panel question Spridgets 2
M MGB Disributor clamp question MG 1
K TR2/3/3A Cylinder head stud height question? Triumph 4
DonC1948 TR6 A "CLASSIC" question. Triumph 6
71TR6 TR2/3/3A A TR3A wiring question Triumph 17
K TR2/3/3A Cylinder Head Bolt question.... Triumph 3
scottkilpatrick TR4/4A TR4 Rear Brake Drum Removal - Basic Question Triumph 16
scottkilpatrick TR4/4A Gear oil and choke question Triumph 4
B TR2/3/3A TR3A Gearbox fluid capacity question Triumph 7

Similar threads

Back
Top