So I'm confused. Again. My cylinder head is getting bronze valve guides, etc.
My Workshop Manual section A.19 has a diagram showing valve guide installation height .875" +.00, -.016 above the head.
But the General Data section for BT7 thru BJ8 lists Valve guide fitted height above head: Inlet = 1.348", Exhaust = 1.036"
What do I tell the Machine shop?
Thanks.
Douglas
My Workshop Manual section A.19 has a diagram showing valve guide installation height .875" +.00, -.016 above the head.
But the General Data section for BT7 thru BJ8 lists Valve guide fitted height above head: Inlet = 1.348", Exhaust = 1.036"
What do I tell the Machine shop?
Thanks.
Douglas