Finnished making the exhaust over the past four days, finished makeing and fitting all the brake pipes,
Fitted the fuel tank, put some fuel in there, she cranked over but not starting, spent most of yesterday faffing around
checking connections, pulled the plugs and was getting a single spark then nothing, turn off turn on, crank it over,
another single spark then nothing.
pulled the connector on the camshaft sensor, something didnt look right, i could not get a socket on the retaining bolt,
remove bolt with a spanner and pulled the sensor, it is all plastic and the bolt lug was bent about 15 degrees,
warmed it with a heat gun and it went back into shape, refitted and we have a spark, fitted the plugs and coils, turned the key,
first on up she fires sounds great out of my home grown exhaust, but idling a bit high at 2000 RPM. but i know the are vacuumpipes need blanking off on the inlet,