twas_brillig
Jedi Knight
Offline
The Danmar MaxJax two post lift will handle 6000 pounds and sells for about $ 2300 locally; their web-page advises that their designers have run simulations with a single tower holding 3000 pounds and that their mounting system passed.
Has anyone looked into the fasibility of using a single tower to store a Sprite? IF it was feasible, I'd probably need to have an alternate steel floor brace/foundation system as I'm not sure if my slab has the required 4 inches of concrete.
Sure would be convenient though: tower permanently up against an outside wall; add the additional bracing come fall; raise sprite; slide second sprite underneath (I don't have a lot of ceiling height so would most likely have to remove one windscreen).
Anyone aware of single tower alternatives?
Doug
Has anyone looked into the fasibility of using a single tower to store a Sprite? IF it was feasible, I'd probably need to have an alternate steel floor brace/foundation system as I'm not sure if my slab has the required 4 inches of concrete.
Sure would be convenient though: tower permanently up against an outside wall; add the additional bracing come fall; raise sprite; slide second sprite underneath (I don't have a lot of ceiling height so would most likely have to remove one windscreen).
Anyone aware of single tower alternatives?
Doug