John_Progess
Jedi Warrior
Offline
I did not have the advantage of disassembling my 60 TR3 so I don't know how the tranny tunnel is supposed to fit. After much adjusting due to a new floor panel installed by the PO, the tunnel sits above the floor by about 1/4" all around. Is there a gasket or something that fits between the tunnel and floor? The mounting plate that secures the top bows to the body is attached to the bows with what appears to be a stepped bolt or screw with a (screw driver?) slot in it and two washers so the plate and bows can rotate. Both washers are missing on one side (so a very sloppy fit) and I was wondering if this is a threaded screw to be removed or some kind of rivet. Thanks for any help and have a good day!
John
John