MatthewsTVR
Freshman Member
Offline
I have a question for the TVR/Triumph guys out there. I own a 1974 TVR 2500m and it has three weber 40 DCOE carburetors on it. These carbs look great, but the problem is that there is a stumble in the acceleration of the car. I have to take off very slow until the RPMs are higher in range. It is sort of manageable if I toggle the choke while driving...It definatly feels like a lean out situation (not enough gas or too much air). The problem never really goes away though.
I have made sure that all of the jets in the carbs are clean and I recently put a fuel regulator on the car which helped a little.
Has anyone else experienced this problem? I need help with this aggrevating problem, I can't find the solution!
Any help or suggestions would be great!
Thank You in Advance,
Matthew
I have made sure that all of the jets in the carbs are clean and I recently put a fuel regulator on the car which helped a little.
Has anyone else experienced this problem? I need help with this aggrevating problem, I can't find the solution!
Any help or suggestions would be great!
Thank You in Advance,
Matthew