Flasher and Turn Signals - Wiring on BE

[Bruce_B]

i've got the headlights, backlights going, high and low beams. Now I'm trying to wire up the Turn signal and Flasher so the R and L turn directionals work.

I've got diagrams, colorcodes, but still not gettingit right. The turn signal switch has two terminals one one side, and a single terminal on the other side. The Flasher Can has a L, B and a P. Can anyone help in what color wires go wire. I'm working with Blue/white, light green, blue/orange wires but
just not getting it right.

 

[spritenut]

First of all there are no blue/orange wires on a Bugeye.
All blue or blu/brn are for the head lamps.
The switch gets the solid green to one terminal, then a green/white to the other and grn/red on the other side. switch the grn/red with grn/white for the correct side of the car.
The B on the flasher is Battery, solid green wire goes there
light green goes to P
light grn/brown goes to L, this is for the dash indicator lamp.

 

[Bruce_B]

Thanks, I'll give that a try. One confusing issue is that the wiring harness has a light green wire going to the dash indicator lamp, so I ran a the light green to L. I'll try your setup tonight. Regards to Toms River.