RickB
Yoda
Offline
I replaced the Master and the booster last weekend on my '80 MGB.
The front brakes bleeding went great, no trouble at all.
The rears - nothing. No fluid comes out when the bleeder is opened.
I'm pretty sure others have experienced something like this so what am I doing wrong?
Possible problems:
I did not bench bleed the MC.
All I did with the PDWA was remove it from the old MC and install it in the new one.
I didn't know about adjusting the rear brakes until they were locked up before bleeding so I didn't do that.
Next time I get under there, this weekend, I'll adjust the back so the wheels lock up before I try to bleed them.
Anyone got any great ideas I'd really like to hear them.
The front brakes bleeding went great, no trouble at all.
The rears - nothing. No fluid comes out when the bleeder is opened.
I'm pretty sure others have experienced something like this so what am I doing wrong?
Possible problems:
I did not bench bleed the MC.
All I did with the PDWA was remove it from the old MC and install it in the new one.
I didn't know about adjusting the rear brakes until they were locked up before bleeding so I didn't do that.
Next time I get under there, this weekend, I'll adjust the back so the wheels lock up before I try to bleed them.
Anyone got any great ideas I'd really like to hear them.