• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 TR6 Front Hood Seal

Share this page

jjbunn

jjbunn

Jedi Knight
Offline
There is a seal that fits above the front grille, and seals to the underside of the hood at the front of the car. I can't figure out which way up it should go: there are two possible orientations. Can anyone advise? Better still, a closeup photo would be great!
 
jimbar said:
lip forward
Click to expand...

The seal looks like this in x-section:

2122538597_30a5b44425_t.jpg


The groove fits over the front lip of the grille surround. But which way up does the seal go? As shown above, or inverted?
 
Hold it upright like an h .... use the bottom of that "h" to clip on to the top of the valance sheet metal, the lip of the seal should face forward. am i missing something here? seems fairly simple to me. I'll see if I can get a pic of it today.
-jim
 
I guess i should have said lip up! sorry about that.
 
Back
Top