• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

How much grease for the drive [prop] shaft plunger

Share this page

S

Swiss Toni

Member
Country flag
Offline
Just so I don't over grease it, how much grease goes in the drive (prop) shaft plunger grease fitting?

The car is on the lift with the wheels off the ground and I've give it so far about 10 "pumps" from the grease gun but no grease is coming out as of yet. Goodness know when it was las lubed.
 
If you're referring to the splined part, it can take a lot. I hit it with about 10 pumps every year and haven't blown anything out (yet).
 
I've give it so far about 10 "pumps" from the grease gun but no grease is coming out as of yet. Goodness know when it was las lubed.

Stop right there OK.-LOL
 
Back
Top