• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

GT6 GT6 Assembly Help!

Share this page

jsfbond

jsfbond

Jedi Warrior
Country flag
Offline
It's been twenty five years since taking the car apart, and now that it is running, and painted. I would like to get it re-assembled. I feel like I'm trying to eat an elephant in one bite. Do you guys have any suggestions as to what goes onto the body before I bolt it back onto the frame to save time and any related aggravation?
 
The GT6 windscreen seems like a place to start, and making sure the hand brake stuff is in good order. I bolted the body on the frame first thing. I would do as much work under the dash- the seats get in the way when laying on your back trying to get the heater and associated hoses and tubes installed. Then the wiring harness. After gauges and the afore mentioned pieces, carpets with the seats last. Be careful with the bonnet, doors and rear hatch so the paint does not get scratched. Good luck.
 
All the little pieces on the firewall. Much easier when you don't have to work around the motor.
backtogetheroct82008_03.jpg
 
Back
Top