• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB Sebring valance

Erica

Member
Country flag
Offline
It's a Moss 475-190 being fitted to the rear of my '77. The fit is good, going right to the bottom of the underlying metal. The fiberglass has a little flex. Only the middle mount had been fitted when the first photo was taken, but the gaps will disappear once the other four mounts are in place. The second photo shows the middle mount being securely attached and one of the other four mounts. The two side mounts are the same but will use the stock angle cut spacers (shown) instead of a nut, fender washer, body panel, fender washer, sandwich.
MGB Sebring rear.jpg

MG inside the rear valance.jpg


Erica
 
I guess the edit feature times out. This is the left inside bracket. One of four with nuts, only the center has a bolt for positive indexing. It's easy but time consuming because to get a nice tight fit each bolt has to be individually fitted and there is a four-hour drying time for the epoxy.
MG inside left rear.jpg

Erica
 
My thought was to keep the metal front valance -- since metal is stronger than fiberglass and I have read that the Moss unit is 1.5 inches too wide for stock fenders -- weld up the matching holes in pictures two and three and the holes where the frame ends and move the valance forward so it attaches flush. I'm uncertain why a PO cut those holes (Who knows why POs do anything?), they are definitely not from the factory, the two holes aren't even the same size.
MGB front valance.jpg

MG right hole.jpg
MG left hole.jpg

Erica
 
In post #3 I said that I read that the Moss Sebring Valance was 1.5 inches too wide for stock wings (but the correct size for flared wings). An acquaintance pointed out that this is not true of Moss Part # 475-185... At least he was told it was part # 475-185, it's marked "MGS70737" with a Sharpie.

I am not connected to Moss in any way. (Although if they want to send me free MGB parts... Well, it would be rude not to accept, right?)

Moss Valance right side.jpg

Moss Valance left side.jpg
 
A $20 angle grinder and a couple of $2 cutoff wheels and no front brackets.
MG front brackets removed.jpg

Erica
 
"My" valance arrived from Virginia, it looks like I'll have to remove a quarter-inch or so from the edge of the fiberglass.
MG val being fitted.jpg

Erica
 
Similar threads
Thread starter Title Forum Replies Date
B MGB well made sebring valance MG 3
C @#$%^ sebring valance MG 4
HealeyPassion AH Sebring/Ruddspeed EFI project car Austin Healey 6
dougie 1963 Sebring Big Healey 57 FAC Austin Healey 4
3798j General TR 1966 12 Hours of Sebring Triumph 0
JPSmit Stirling Moss - Sebring Sprite Spridgets 3
dougie Lowest Mile Works Sebring Sprite for Sale Austin Healey 5
S Hi From Sebring FL TVR 0
Elva164 Trailer space/race support available for Sebring! Racing 0
HealeyRick Sebring Coupe at Amelia Island Spridgets 4
dougie Sebring Sprite Factory Racer Ebay Austin Healey 4
HealeyRick Healeys at Sebring Austin Healey 6
HealeyRick Sir Stirling Reunited with Sebring Sprite Spridgets 18
Michael Oritt Sebring Racing 6
aeronca65t Sebring Sprite Spridgets 20
HealeyRick Healey on the Roof - Sebring 1960 Austin Healey 11
HealeyRick Paddy Gaston's RAM 35 Sebring Sprite & RC Planes Spridgets 0
Editor_Reid Caption Assistance - 1963 Sebring Photos Austin Healey 8
RickB Poor little MK2 Sprite - Seattle Craigslist 'Sebring bonnet' Spridgets 24
HealeyRick Ecurie Ecosse Sebring Sprite For Sale Spridgets 8
S Classic Motorsports article on the Sebring Alpine Sunbeam (Rootes) 1
dougie !966 Sebring /LeMans "Works" Sprite Going to Auction Austin Healey 2
Nunyas Corvette Racing @ Sebring Racing 0
Michael Oritt SVRA Sebring Spring Vintage Classic Racing 3
C MGB-GT The Sebring GTs MG 1
HealeyRick Healeys at Sebring 1963 Austin Healey 1
dougie '63 AH Sebring 3000 57 FAC Austin Healey 1
W Interesting 1959 Austin Healey Sebring Sprite Spridgets 7
aeronca65t MGA Sebring MGAs re-unite MG 3
rkep01 Brand new repro Sebring Sprite photos Spridgets 5
M Fiberglass Bonnet SEBRING Spridgets 6
dougie 1958 Sebring Sprite Austin Healey 0
M Sebring Scuttle Vent Austin Healey 3
RickB Sebring/ Lemans Sprite NOS Injected Eng & 5-Speed Spridgets 17
H Austin Healey Club Sebring area Austin Healey 7
AUSMHLY 1961 Austin-Healey Sebring Sprite Lightweight Work Austin Healey 0
dougie Another Chance on the '65 Sebring Sprite Austin Healey 3
S SF bay area junk yards - Sebring car Racing 5
Michael Oritt House available for rent--Sebring SVRA March 15-21 Racing 6
GeeBee1 Sebring Sprite for Sale Spridgets 0
dougie 1959 Austin-Healey Sebring Factory Team Car Austin Healey 4
dougie 1959 Austin-Healey Sebring Factory Team Car Racing 3
apbos A Real Sebring Sprite Spridgets 14
dougie 1965 Sebring Sprite For Sale Austin Healey 3
dougie 1965 Sebring Sprite For Sale Racing 4
N Sebring winning sprite on E-bay!!!! Spridgets 27
DerekJ Sebring 57 & 58 - Colour Films Austin Healey 1
W 410 EAO Sebring Sprite for sale for 85,000 GBP Spridgets 2
dougie '64 Sebring Races Austin Healey 4
HealeyRick Sebring Sprite at Lime Rock Spridgets 4

Similar threads

Back
Top